9
ENG
ENGLISH
ASSEMBLING AND PREPARING
(19 V )
(19 V )
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (3.94 inches) (minimum)
space from the wall for proper ventilation.
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
100 mm
(3.94 inches)
or
y
Illustrations in this document represent
typical procedures, so they may look
different from the actual product.
y
Do not carry the monitor upside down by
just holding the stand base. This may cause
the monitor to fall off the stand and could
result in personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage
to it.
y
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be
covered by the product warranty.
CAUTION
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
