ENGLISH
16
ASSEMBLING AND PREPARING
Using the Kensington security system
y
y
Image shown may differ from your TV.
The Kensington security system connector is located at
the back of the TV. For more information of installation and
using, refer to the manual supplied with the Kensington
security system or visit
http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
NOTE
y
y
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm on each
side and from the wall. Detailed installation instructions
are available from your dealer, see the optional Tilt Wall
Mounting Bracket Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface
(optional parts), attach it carefully so it will not drop.
1
If you use screw longer than standard, the TV
might be damaged internally.
2
If you use improper screw, the product might be
damaged and drop from mounted position. In this
case, LG Electronics is not responsible for it.
Model
19MN43*
24MT40*
22MT44*
20/22/24MT45*
29MT40*
28/29MT45*
24/27MT46*
29MT44*
Wall Mount (A x B)
75 x 75
100 x 100
Standard screw
M4 x L10
Number of screws
4
Wall mount bracket
(optional)
RW120
