LG 048231026772 Owner'S Manual Download Page 42

Page: 42 / 60

MAINTENANCE

To remove the antifreeze from the washer

after storage, run the

Rinse+Spin

cycle using

detergent.
• Do not add laundry to this cycle.

When the Water Inlet Hoses are

Frozen

Turn off the washer, and unplug the power

cord.

Turn off the faucets connected to the water

inlet hoses.

Pour hot water on the frozen faucets to thaw

the water inlet hoses and remove the water

inlet hoses.

Immerse the water inlet hoses in hot water to

thaw them.

Reconnect the water inlet hoses to the water

inlets of the washer and to the faucets.
• See

Connecting the Water Inlet Hoses

for

details.

Turn on the faucets.

Press the

Power

button to turn on the

washer.

Press the

Spin

button to operate spin only

cycle for draining and spinning.

Press the

Start/Pause

button.

When the Drain Hose is Frozen

Pour hot water in the washer drum and close

the door.

Wait for

1 - 2 hours

Press the

Power

button.

Press the

Spin

button to operate spin only

cycle for draining and spinning.

Press the

Start/Pause

button to make sure

the water drains.

Summary of Contents for 048231026772





























































Search results

Summary of Contents for 048231026772

Reviews:

Related manuals for 048231026772

Brands by name

Popular brands

LG 048231026772, Owner'S Manual

Search results

Summary of Contents for 048231026772

Reviews:

Related manuals for 048231026772

Brands by name

Popular brands