13
7.3 The algae are not dying
1.Check whether the e-Box is in operation:
a.Check the LCD
2.Check whether the center of the front of the transducer (about 2 cm in
diameter) is clean
a.The transducer appears to be clean
- The transducer is working
b.If the transducer is not clean and a calcium-like layer or biofilm has formed:
- The sound waves are not properly emitted
- Clean the transducer with an acidic solution such as kitchen vinegar
EN
b. Request operation status by SMS, see section 4.7.4
- Check if the LCD is on.
- Check if the transmitters are running a program (section 4.7.1).
If a transmitter is broken or off, the words
“ERROR”
or
“OFF”
are shown
on the LCD behind the transmitter number (T1 - T4)
- Check If one of the Transmitters shows “OFF” follow section 4.8 to program the
transmitter.
3. If the Transmitter is clean and emitting an ultrasonic program, we can change the
ultrasonic program to match the algae in your water.
a. Contact your dealer, inform him from the algae in your water, by explanation
or sending him a picture.
b. Your dealer will advise you the most optimal ultrasonic program.
c. If your device is equipped with a wiper, check if the wiper is still working, if not,
contact your dealer.
