LG SIGNATURE OLED65W7 Series, Safety And Reference

Page: 41 / 58

21
ENGLISH
Licenses
Supported licenses may differ by model. For
more information about licenses, visit
www.lg.com .
Open source
software notice
information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com .
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to
opensource@lge.com . This
offer is valid for three (3) years from the date on
which you purchased the product.
External control
device setup
To obtain the external control device setup
information, please visit
www.lg.com .
Troubleshooting
Cannot control the TV with the remote control.
•
Check the remote control sensor on the
product and try again.
• Check if there is any obstacle between the
product and the remote control.
•
Check if the batteries are still working and
properly installed ( to , to ).
No image display and no sound is produced.
•
Check if the product is turned on.
•
Check if the power cord is connected to a wall
outlet.
•
Check if there is a problem in the wall outlet
by connecting other products.
The TV turns off suddenly.
•
Check the power control settings. The power
supply may be interrupted.
•
Check if the Sleep Timer / Timer Power Off
is activated in the
Timers
settings.
•
Check if the
Auto Power Off
is activated
in the General Eco Mode settings.
(Depending on model)
•
If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.
When connecting to the PC (HDMI), ‘
No Signal
’
or ‘ Invalid Format ’ is displayed.
•
Turn the TV off/on using the remote control.
•
Reconnect the HDMI cable.
•
Restart the PC with the TV on.