ipLDK-60 Hardware Description and Installation Manual
Issue 1
STARTING THE ipLDK-60
JAN, 2007
58
6.2 Basic Programming
The ipLDK-60 System can be programmed to meet an individual customer’s needs. There are two ways to perform
Admin Programming:
§
PC Admin – Refer to PC Admin Programming Manual
§
DKT – In this manual, DKT (Station 100) Admin Programming is described.
6.2.1 DKT Programming
All programming is done at Station 100 (Station Port #00) using the LDP-6230D Digital Key Telephone.
Additional programming stations may be assigned (113 - FLEX1), but only DKT can be active in the programming
mode at any one time.
When in programming mode, Station 100 does not operate as a normal telephone, but instead works as a
programming instrument with all of the buttons redefined. The keys of the dial pad are used to enter the various data
fields to enter numerical information:
§
Flexible Buttons –
The 24 buttons located at the right side of the phone are used to indicate a
specific data field and to enter information.
§
3 Soft Buttons (BACK / DELETE / SAVE) –
it is used to go back, to delete data, or to save data
input.
6.2.1.1 Button Explanation
Figure 6.2.1.1 describes the buttons and function keys (refer to the
LDP-7024D User Guide
and also the
LIP-7024D
User Guide
for detailed information and operation instructions).
FIGURE 6.2.1.1 DESCRIPTION OF LDP-7024D
BUTTONS
