LG-Nortel ELO WR100T User Manual Download Page 93

Page: 93 / 119

DVANCED

ETTINGS

NAT Mapping Table

This page displays the current NAPT (Network Address Port
Translation) address mappings.

The NAT address mappings are listed 20 lines per page, click the
control buttons to move forwards and backwards. As the NAT
mapping is dynamic, a

Refresh

button is provided to refresh the

NAT Mapping Table with the most updated values.

The content of the NAT Mapping Table is described as follows:

• Protocol - protocol of the flow.

• Local IP - local (LAN) host’s IP address for the flow.

• Local Port - local (LAN) host’s port number for the flow.

• Pseudo IP - translated IP address for the flow.

• Pseudo Port - translated port number for the flow.

• Peer IP - remote (WAN) host’s IP address for the flow.

• Peer Port - remote (WAN) host’s port number for the flow.

4-57

Summary of Contents for ELO WR100T
























































































































Search results

Summary of Contents for ELO WR100T

Reviews:

Related manuals for ELO WR100T

Brands by name

Popular brands

LG-Nortel ELO WR100T, User Manual

Search results

Summary of Contents for ELO WR100T

Reviews:

Related manuals for ELO WR100T

Brands by name

Popular brands