ARIA SOHO IP Hardware Description and Installation Manual
Issue 1
STARTING THE ARIA SOHO IP
December, 2008
56
6.2 Basic Programming
The ARIA SOHO IP System can be programmed to meet an individual customer’s needs. There are two ways to
perform Admin Programming:
PC Admin – Refer to PC Admin Programming Manual
DKT – In this manual, DKT (Station 100) Admin Programming is described.
6.2.1 DKT Programming
All programming is done at Station 100 (Station Port #00) using the LDP-7224D or LIP-7024D Digital Key Telephone.
Additional programming stations may be assigned (113 - FLEX1), but only DKT can be active in the programming
mode at any one time.
When in programming mode, Station 100 does not operate as a normal telephone, but instead works as a
programming instrument with all of the buttons redefined. The keys of the dial pad are used to enter the various data
fields to enter numerical information:
Flexible Buttons –
The 24 buttons located at the right side of the phone are used to indicate a
specific data field and to enter information.
3 Soft Buttons (BACK / DELETE / SAVE) –
it is used to go back, to delete data, or to save data
input.
6.2.1.1 Button Explanation
Figure 6.2.1.1 describes the buttons and function keys (refer to the
LDP-7224D User Guide
and also the
LIP-7024D
User Guide
for detailed information and operation instructions).
FIGURE 6.2.1.1 DESCRIPTION OF LDP-7024D
BUTTONS
