LIP-8002/8002A
iPECS
Installer
Guide
56
-
Pre defines digits to insert in the front of the truncated number.
-
Post defines the digits to insert at the end of the truncated number.
The following are examples of Dial Plans using the digit map tables.
Simple Dial Plan
Customer requirement:
Process the call after any 7 digit number is dialed or if the Operator is dialed at digit ‘0’.
Digit map routing entry
The digit map of this Dial Plan is (0T|xxxxxxx).
From this map, if the user dials '0' as the first digit, the IP Phone will wait for the pause time for
additional digits. After the pause, if no additional digits are dialed, the phone places a call to the
Operator. In addition, after the user dials any seven digits, the call is processed.
Complex Dial Plan
Customer requirement:
Process the call after the local operator at 0, long distance operator at 00, a four-digit local
extension number starting with 3,4 or 5, a seven-digit local number prefixed by an 8, two-digit
number preceded by star (‘*’), a ten digit long distance number prefixed by 91, or an
international number starting with 9011 is dialed.
Digit map routing entry
The dial plan for this is (0T|00T|[3-5]xxx|8xxxxxxx|*xx|91xxxxxxxxxx|9011x.T).
2
nd
Dial Tone
A second 512-character string map is employed to provide 2
nd
Dial Tone.
Customer requirements:
To provide second dial tone after a ‘9’ is dialed, establish a Dial Plan as below.
In the Digit Map (2
nd
Dial Tone) text box, the dial plan for this is (9|).
To change Digit Map Table parameters:
Assure the Digit Map radial button is selected under the Dial Plan Type
Enter the desired values into the Digit Map (Routing) box.
Select the
button.
To set-up or change a Digit Map to provide second dial-tone
Enter the digits in the Digit Map (2
nd
Dial Tone) box.
Click the
button.
To modify a Digit Map process:
Enter the digits in the Digit Map (Process) boxes.
Click the
button.
To delete a Digit Map process:
Select the DEL check box.
Click the
button.
