iPECS SBG-1000 User Manual (IP-PBX Features)
2-18
1. The System will send a distinctive Queue recall to the station that was first-in queue, the
appropriate
{
CO
}
LED button will flash
2. The CO line and station will appear busy to all other users.
Conditions
1. A CO line can have any number of simultaneous queue requests.
2. A station may only have a single active CO queue request; activating a new queue request
will replace, and cancel an existing queue.
3.
A Queue recall will always signal the station with a tone ring, ignoring the station’s assigned
Intercom Signaling mode.
4. Queue recall will bypass a busy station, and place the station at the bottom of the queue list.
5. Queue recall will signal a station for 15 seconds, after which, the station is removed from the
queue (the queue is cancelled).
Programming
Related Features
CO Access
Hardware
2.10 T
HREE
-P
ARTY
V
OICE
C
ONFERENCE
Description
The system will allow three internal and external parties to be connected on a call, conference. An
unlimited number of 3-party conferences may be established.
Operation
LIP Phone
To establish an ad-hoc conference:
1. Establish first call.
2. Press the
[
CONF
]
button; the LED will light, and the connected party is placed on exclusive
hold (the user receives dial-tone).
3. Place second call.
4. When connected, press
[
CONF
]
; the new call is placed on exclusive hold.
5. Press
[
CONF
]
button to establish 3-party conference.
To place a conference on hold:
1. Press the
[
HOLD
]
button; the
[
CONF
]
button LED will flash.
To retrieve held conference:
