LG-Ericsson iPECS SBG-1000 User Manual Download Page 190

Page: 190 / 197

iPECS SBG-1000 User Manual (IP-PBX Features)

3-30

ATTRIBUTE

DESCRIPTION

RANGE

DEFAULT

Save Enable

The system can output all outgoing call

records (ON), or to allow for PSTN call set-up

times, only records for calls that exceed the

SMDR Timer (OFF, refer to Start Timer

Attribute).

OFF

Print Enable

The system can output SMDR records

automatically as they occur (real-time) or only

when requested. When this attribute is ON,

SMDR output is automatic at call completion.

OFF

Record Type

The system can record all outgoing calls or

only long distance calls. Long distance calls

are identified by the LD digit count and LD
codes assigned in “Long Distance Call Digit
Counter” and “Long Distance Code” below.

Long Distance

All call

All Call

Long Distance Call Digit

Counter

Dialed numbers, which exceed the assigned

LD digit count are considered long distance

calls for SMDR and COS purposes.

07-15

Print Incoming Call

The system can output records for Incoming

calls as well as outgoing calls. If enabled,

incoming as well as outgoing calls are

recorded.

OFF

Print Lost Call

When incoming call records are enabled, the

system can also provide records for

unanswered incoming (abandoned) calls.

OFF

Records In Detail

The system can output detailed call records

(ON) or summary call information (total

number of calls, cost and cost for each

station).

OFF

Hidden Dialed Digit

For security purposes, digits dialed for an

outgoing call can be hidden and replaced with
“*”. This field defines the number of digits to

hide the trailing digits

0~9

SMDR Currency Unit

The unit of currency used for call cost can be

identified with 3-characters for easy reference.

Max 3 Characters

SMDR Cost Per Metering

Pulse

When call metering is provided by the PSTN,

the cost per metering pulse can be assigned.

6-digits

000000

SMDR Decimal Position

This value determines the position of the

decimal in the Cost per Pulse entry above,

starting from the right most digit.

0~5

Record Start Guaranteed

Time

To allow for call set-up times through the

PSTN,

a “Valid call timer” can be set.

000~250

(msec)

000

Long Distance Code

For SMDR and COS purposes, five (5) Long

Distance codes of up to two (2) digits each can

be assigned. If dialed as the 1st digits, the call

is considered an LD call.

5 two digit LD

codes, use * as wild

card (any digit)

Summary of Contents for iPECS SBG-1000






































































































































































































Search results

Summary of Contents for iPECS SBG-1000

Reviews:

Related manuals for iPECS SBG-1000

Brands by name

Popular brands

LG-Ericsson iPECS SBG-1000, User Manual

Search results

Summary of Contents for iPECS SBG-1000

Reviews:

Related manuals for iPECS SBG-1000

Brands by name

Popular brands