LG-Ericsson IPECS GDC-480H User Manual Download Page 33 | Manualshive

Page: 33 / 70

background image

GDC-480H Wireless Handset
User Guide

23

To delete a Station Speed Dial number:

1. Press the

Talk

( ) button, you receive dial tone.

2. Press and hold, 2 seconds, the

SpeedProgram

( ) button.

3. Press the

SpeedProgram

( ) button.

4. Dial the Speed dial bin location.
5. If iPECS-LIKUCPeMG system, press the

SpeedProgram

( ) button.



Note:

Depending on the host system, the number of Station Speed dials available, the length of
the stored number, and special instructions available will vary (check with your System
Administrator).

To use a Station Speed Dial:

1. Press the

Talk

( ) button, you receive dial tone.

2. Press the

SpeedProgram

( ) button.

3. Dial the Speed dial bin location.

4.8 Using System Speed Numbers

In addition to Station Speed Dials, the host system includes memory to store system speed
dial numbers available to all stations connected to the system. These numbers are stored by
the attendant or System Administrator.

To use a System Speed Dial:

1. Press the

Talk

( ) button, you receive dial tone.

2. Press the

SpeedProgram

( ) button.

3. Dial the Speed dial bin location. Contact your System Administrator for System

Speed dial numbers available.



Note:

In some cases, your access to Speed dials may be limited in the system (check with your
System Administrator).

4.9 Call Forward

You may select to have your incoming calls re-routed to another station, a station group, or
voice mail.

To activate call forward for your calls:

1. Press

Talk

( ) button, you receive dial tone.

2. Dial the Call Forward code (default=554).
3. Dial the Call Forward type code-



0 – Follow-me forward



1 – Unconditional forward



2 – Busy forward



3 – No answer forward



4 – Busy or No answer forward



5-9 – Off-net forward, check with your System Administrator

«
...
31
32
33
34
35
...
»

Summary of Contents for IPECS GDC-480H







































































Reviews:

No comments

Related manuals for IPECS GDC-480H

Brand: Janam Pages: 70

Brand: TCL Pages: 34

Brand: AU Pages: 3

one touch Fire 4012X

Brand: Alcatel Pages: 31

Brand: TCL Pages: 19

Brand: KDDI Pages: 51

Comfort Pro P100

Brand: T-Comfort Pages: 148

Brand: Ericsson Pages: 71

Brand: Iget Pages: 63

Brand: Samsung Pages: 151

Brand: Samsung Pages: 222

Brand: Samsung Pages: 151

Brand: Samsung Pages: 109

Brand: Valore Pages: 4

Brand: Xiaomi Pages: 1

SPA921 - Cisco - IP Phone

Brand: Linksys Pages: 5

Brand: LG Pages: 106

Brand: Yealink Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands