17
How to Mix Materials with the RBM
™
Ribbon Blender (smaller range)
Tools and Materials Needed
• Raw ingredients
• RBM
™
Ribbon Blender
• Receptacle for mixed material
• Safety goggles
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING:
For personal protection while operating the RBM
™
Ribbon Blender,
contain long hair and do not wear loose jewelry
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
1. Ensure that the Discharge Chute is closed.
2. Open the Mixing Tank's cover by hand.
3. Pour the raw ingredients into the Mixing Tank.
3.1 Note: Pour enough material to cover the Ribbon Agitator to get the best mixing results.
Do NOT overfill the Mixing Tank. Fill up only to 70% capacity. See graphic below for further
information regarding filling capacity percentages:
80%
60%
25%
4. Close the Mixing Tank's cover.
Overfill. Do not
fill to this point.