manualshive.com logo in svg

LFA RBM 100, User Manual, Page: 11 / 40

Share
Download
LFA RBM 100 User Manual Download Page 11

11

READ BEFORE INSTALLATION:
LFA Machines is able to advise on installation of the larger range of the 
machines. Please contact us for more information:

Moving the RBM

™

 Ribbon Blender (larger machine range) with Forklifts

Tools and Materials Needed

•  Two forklifts that are rated to lift at least 5,000 kg
•  Fork extensions for both forklifts
•  Straps that are rated for at least 5,000 kg
•  Spirit level
•  Heavy duty grip gloves
•  Steel toe boots

Instructions

1. Wrap the straps around the forklifts' forks. 
2. Position the extended forks of the forklift trucks under each side of the machine and wrap the 
straps on the forks around both sides of the machine. 
3. Carefully lift the machine off the pallet. 
4. Lower the machine so that it is no more than 2-3 cm off the floor. 
5. Position the machine in the desired location and carefully lower the machine.
6. Ensure that the machine is flat on the ground with a spirit level.
7. Remove the straps and plug the machine into the appropriate electrical outlet.

UK

Phone

+44 (0) 0345 165 20 25

Email 

[email protected]

Taiwan

Phone

+886 2773 74704

Email 

[email protected]

USA

Phone

(682) 312-0034

Email 

[email protected]

Summary of Contents for RBM 100









































Reviews:

No comments