5
4. Remove the preassembled screws from the base (C) with a
Phillips screwdriver (not included). Save for later use.
5. Secure the middle pole (B) to the base (C) with the previously
removed screws. Tighten with a Phillips screwdriver.
6. Ins
e
rt bulbs (not included). Use 40-watt max. candelabra-base
(E12) incandescent bulbs. Then, attach the
cover (D)
to the
fixture (E) with thumbscrews (GG). Tighten with flathead
screwdriver (not included).
7. Connect bare ground wire from the base (C) to the ground
wire from the concrete by twisting a wire nut (EE) onto bare
ends of the wires. Connect white wire from the base (C) to the
white wire from the concrete by twisting a wire nut (EE) onto
bare ends of the wires. Connect the black wire from the base
(C) to the black wire from the concrete by twisting a second
wire nut (EE) onto the bare ends of the wires. Secure the wire
nuts (EE) with electrical tape (not included).
Hardware Used
Wire Nut
x 3
EE
EE
5
B
C
4
C
Hardware Used
Thumbscrew
x 2
GG
6
E
GG
D
7
