Maintenance
46
GA01301_002_C1 - 07/2018 - © Leybold
5.9 Removing and Remounting the Pump Module
Required tools:
Allen keys size 3, 4, 6 and 8 mm, box wrench size 13, possibly pliers, torque
wrench.
Required spare parts:
Gasket (14/3)
For material No., see spare parts list
5.9.1 Removing the Pump Module
Drain the oil and remove the oil case (see Chapter 5.6).
Unscrew the hex. nuts (14/1).
Pull the entire pump module (14/2) forward off the tie rods (14/5).
When doing so, ensure that the individual pin-fitted parts are not loosened.
Further disassembly of the pump module should only be carried out by a
trained service engineer.
Remove the gasket (14/3).
Remove the coupling element (14/4).
After removing the protective shipping materials, handle the new pump
module with care.
Before installing a new pump module, remove the four tie rods from the new
module and insert them in the old one for protection during shipment.
Fig. 14 Removing and remounting the pump module
1 Hex. nuts
2 Pump module
3 Gasket
4 Coupling element
5 Tie rods
NOTICE
