
3
300267596_002_C0 - 11/2016 - © Leybold
Important Safety Information
Indicates procedures that must be strictly observed to prevent hazards to
persons.
Indicates procedures that must be strictly observed to prevent damage to, or
destruction of the product.
Emphasises additional application information and other useful information
provided within these Operating Instructions.
The Leybold Sogevac
®
SV40 B - SV65 B - SV100 B has been designed
for safe and efficient operation when used properly and in accordance
with these Operating Instructions. It is the responsibility of the user to
carefully read and strictly observe all safety precautions described in this
section and throughout the Operating Instructions. The Sogevac
®
SV40
B - SV65 B - SV100 B
must only be operated in the proper condition
and under the conditions described in the Operating Instructions
.
It must be operated and maintained by trained personnel only. Consult
local, state, and national agencies regarding specific requirements and
regulations. Address any further safety, operation and/or maintenance
questions to our nearest office.
Failure to observe the following precautions could result in serious
personal injury!
Sogevac
®
pumps are not designed:
■
for pumping of dusty, aggressive, corrosive, flammable or explosive gases
or gases mixtures,
■
for pumping of oxygen with a greater concentration than atmospheric
concentration (>20%) or other highly reactive gases
■
for working in flammable, explosive or dusty environment.
For all these cases, special materials must be used. In case of doubt, please
contact Leybold.
See also the limits of use indicated in the CE declaration of conformity.
Never expose part of the body to the vacuum. There is a danger of injury.
Never operate the pump with an open and thus accessible inlet. Vacuum
connections as well as oil filling and oil draining openings must not be
opened during operation of the pump.
When operating pump is hot and some surfaces could reach a temperature
higher than 80 °C (176 °F). There is a risk of burn by touching.
Depending on the process involved, dangerous substances and oil may
escape from the pump. Take the necessary safety precautions!
When working on the pump system always observe the Operating
Instructions.
Safety Information
Warning
Caution
Note
Warning