background image

1  Safety and compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6

1.1  Definition of Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . .   6

2  Important Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . .   7

2.1  Mechanical Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7

2.2  Electrical Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7

2.3  Thermal Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

2.4  Hazards Caused by Materials and Substances. . . . . . . . . . . . . . . . . . . .   8

2.5  Noise Hazard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8

2.6  Risk of Damaging the Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8

3  Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9

3.1  Supplied Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9

3.2  Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9

3.3  Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10

4  Transport and Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   12

5  Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13

5.1  Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13

5.2  Conforming Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13

5.2.1  Non-conforming Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13

5.3  Connect the Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   14

5.4  Removal of Pump Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   14

5.5  Electrical Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   15

5.6  Optional VFD Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16

5.7  Purge Gas/Gas Ballast Connection (optional). . . . . . . . . . . . . . . . . . . .   16

5.8  Manual Gas Ballast Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   17

5.9  Connecting solenoid gas ballast/purge valves. . . . . . . . . . . . . . . . . . . .   17

6  Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   19

6.1  Switching Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   19

6.2  Leybold Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   19

7  Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20

7.1  Maintenance Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   20

7.2  Pump Timing Belt Change. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   20

3

300766038_002 - © Leybold

Contents

Summary of Contents for 111065

































Reviews: