Planar LookThru Transparent OLED Display User Manual
020-1380-00B
Page | 50
Navigating Through the Menus
25.2 System Settings Submenu
Enable Status LED
•
Turns on status LEDs
Pixel Orbit
•
Turns on pixel orbit. This moves the entire screen randomly by up to 10 pixels to
lessen the onset of burn in.
Inverted Mount
•
Rotates the OSD when an inverted mount is used
IR Remote Code
•
Identifies the remote code address used. Refer to the
IR Command Protocol
section
DisplayPort Type
•
Set the version of DisplayPort that is used by the system
•
Options:
1.1, 1.2;
Default:
1.2
Keypad Lock
•
Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.
•
Options:
Enable, Disable;
Default:
Disable
IR Remote Lock
•
Lock or unlock the remote control. When it is enabled, all remote control presses will
be ignored.
•
Options:
Enable, Disable;
Default:
Disable
Factory Reset
•
Return the saved settings in a system to their factory defaults
Firmware Update
•
Update the firmware for the display. Refer to the instructions on the firmware release
package for more information.
