Lexus RX300 2003 Owner'S Manual Download Page 112

Page: 112 / 354

2003 RX300 from Aug. 02’ Prod. (OM48442U)

16R099

Seat belt hanger

For the outer seat belts, use the seat belt hangers to
prevent the belts from being tangled.

NOTICE

The seat belt buckles must be stowed before you fold
down the rear seatbacks.

16R271

Folding down rear seatbacks

Lower the head restraints to the lowest position, unlock
the seatbacks and fold them down.

When returning the rear seats to their original position, lift
up the seatbacks until they lock.

Summary of Contents for RX300 2003



































































































































































































































































































































































Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands

Lexus RX300 2003, Owner'S Manual

Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands