Lexus RX300 2003 Owner'S Manual Download Page 97

Page: 97 / 354

HOOD

15R001a

1. To open the hood, pull the hood lock release lever under
the instrument panel. The hood will spring up slightly.

15R037

2. Insert your fingers under the hood, push up the
auxiliary catch lever and lift the hood.

Before closing the hood, check to see that you have not
forgotten any tools, rags, etc. Then lower the hood and make
sure it locks.

CAUTION

Before driving, be sure that the hood is securely locked.
Otherwise, the hood may open unexpectedly while
driving and an accident may occur.

Summary of Contents for RX300 2003



































































































































































































































































































































































Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands

Lexus RX300 2003, Owner'S Manual

Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands