manualshive.com logo in svg

Lexus LS500, Manual

The Lexus LS500 is a luxurious sedan that epitomizes comfort and performance. Our user-friendly manual provides detailed instructions and insights into utilizing every feature of this exceptional vehicle. Download our comprehensive and free manual from manualshive.com to enhance your Lexus LS500 ownership experience.

Share
Download
background image

307

6-3. Do-it-yourself maintenance

LC500_LC500h_OM_OM11405U_(U)

6

Mai
nte

na

nc

e a

nd

 c

are

carrying out initialization or tire inflation 

pressure adjustment.

●

If you have accidentally turned the engine 

switch <power switch> off during initial-

ization, it is not necessary to manually 

restart the initialization again, as initializa-

tion will restart automatically the next 

time the engine switch <power switch> is 

turned to IGNITION ON mode <ON 

mode>.

●

If you accidentally perform initialization 

when initialization is not necessary, adjust 

the tire inflation pressure to the specified 

level when the tires are cold, and conduct 

initialization again.

●

While the position of each tire is being 

determined and the inflation pressures 

are not being displayed on the multi-

information display, if the inflation pres-

sure of a tire drops, the tire pressure 

warning light will come on.

■

When initialization of the tire pressure 

warning system has failed

Initialization may take longer to complete if 

the vehicle is driven on an unpaved road. 

When performing initialization, drive on a 

paved road if possible. Depending on the 

driving environment and condition of the 

tires, initialization will be completed in 

approximately 10 to 30 minutes. If initializa-

tion is not complete after driving approxi-

mately 10 to 30 minutes, continue driving 

for a while. If the inflation of each tire is not 

displayed after driving for approximately 1 

hour, perform the following procedure.

●

Park the vehicle in a safe place for 

approximately 20 minutes. Then drive 

straight (with occasional left and right 

turns) at approximately 25 mph (40 

km/h) or more for approximately 10 to 

30 minutes.

However, in the following situations, the tire 
inflation pressure will not be recorded and 
the system will not operate properly. Per-
form initialization again.

●

When performing initialization, the tire 

pressure warning light does not blink 3 

times. (initialization will not occur while 

driving)

●

After performing initialization, the tire 

pressure warning light blinks for 1 minute 

then stays on after driving for about 20 

minutes.

If the inflation pressure of each tire is still not 
displayed, have the vehicle inspected by 
your Lexus dealer.

■

When registering ID codes

●

Initialize the tire pressure warning system 

after ID code registration. Initialization is 

disabled if the system was initialized 

before registration.

●

After ID code registration, the tires are 

hot by driving. Initialize the tire pressure 

warning system after the tires become 

cold.

The tire pressure warning valve and 
transmitter is equipped with a unique 
ID code. When replacing a tire pres-
sure warning valve and transmitter, it is 
necessary to register the ID code.
When registering the ID codes, per-
form the following procedure.

1

Turn the engine switch <power 
switch> to IGNITION ON mode 
<ON mode>.

2

Press 

 or 

 of the meter con-

trol switches and select 

.

WARNING

■

When initializing the tire pressure 

warning system

Do not initialize tire inflation pressure 

without first adjusting the tire inflation 

pressure to the specified level. Other-

wise, the tire pressure warning light may 

not come on even if the tire inflation pres-

sure is low, or it may come on when the 

tire inflation pressure is actually normal.

Registering ID codes

Summary of Contents for LS500

















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LS500

Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
RAM Truck Diesel Supplement 2012 Owner'S Manual preview
Truck Diesel Supplement 2012
Brand: RAM Pages: 174
Hyundai SANTA FE 2020 Getting Started Manual preview
SANTA FE 2020
Brand: Hyundai Pages: 19
FVC Sprinter Side Ladder Installation Manual preview
Sprinter Side Ladder
Brand: FVC Pages: 8
Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P Datasheet preview
1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P
Brand: Havis-Shields Pages: 1
Fab Fours C3150 Installation Instructions Manual preview
C3150
Brand: Fab Fours Pages: 21
Peiying PY0101 Owner'S Manual preview
PY0101
Brand: Peiying Pages: 32
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
Speedtech 64-67 Instructional Manual preview
64-67
Brand: Speedtech Pages: 12
HUSKY LINERS 47954 Installation Instructions preview
47954
Brand: HUSKY LINERS Pages: 4
iOttie HLCRIO138 Manual preview
HLCRIO138
Brand: iOttie Pages: 19
Gigaware Gigaware 12-493 User Manual preview
Gigaware 12-493
Brand: Gigaware Pages: 8
Phonocar 6/946 Instruction Manual preview
6/946
Brand: Phonocar Pages: 4
A-Tach Mounts 50321 Quick Start Manual preview
50321
Brand: A-Tach Mounts Pages: 2

Brands by name

Popular brands

Load more brands