Lexus LS500, Manual

Page: 297 / 432

297
6-3. Do-it-yourself maintenance
LC500_LC500h_OM_OM11405U_(U)
6
Mai
nte
na
nc
e a
nd
c
are
■
Checking fluid level
The brake fluid level should be
between the “MAX” and “MIN” lines
on the tank.

LC500

LC500h
■
Adding fluid
Make sure to check the fluid type and
prepare the necessary items.

Fluid type
SAE J1703 or FMVSS No.116 DOT 3
brake fluid

Item
Clean funnel
■
Brake fluid can absorb moisture from
the air
Excess moisture in the brake fluid can cause
a dangerous loss of braking efficiency. Use
only newly opened brake fluid.
If any washer does not work or “Wind-
shield Washer Fluid Low” is shown on
the multi-information display, the
washer tank may be empty. Add
washer fluid.
WARNING
■ When the engine <hybrid system> is
hot
Do not touch the radiator or condenser
as they may be hot and cause serious
injuries, such as burns.
Checking and adding the brake
fluid
WARNING
■ When filling the reservoir
Take care as brake fluid can harm your
hands and eyes and damage painted sur-
faces.
If fluid gets on your hands or in your eyes,
flush the affected area with clean water
immediately.
If you still experience discomfort, see a
doctor.
NOTICE
■
If the fluid level is low or high
It is normal for the brake fluid level to go
down slightly as the brake pads wear out
or when the fluid level in the accumulator
is high.
If the reservoir needs frequent refilling,
there may be a serious problem.
Checking and adding the washer
fluid