HS250h_QG_U (75023)
73
■
Programming HomeLink
Overhead console type
Hold your hand-held transmitter within
3 inches of the HomeLink
buttons.
Press and hold down the desired
HomeLink
button.
For U.S.A. owners:
While pressing the HomeLink
but-
ton, press and hold down the button
on the hand-held transmitter until the
indicator light changes from a slow to
a rapid flash.
For Canadian owners:
While pressing the HomeLink
but-
ton, repeatedly press and release
(cycle) the button on the hand-held
transmitter every 2 seconds until the
indicator light changes from a slow to
a rapid flash.
If your garage door is of the rolling code
type:
Press the training button on the motor-
head unit in your garage.
Press and hold the vehicle’s programmed
HomeLink
button for 2 seconds and
release it. Repeat this step once again.
If the door does not open, press and
release the same button once again.
■
Programming other devices
For U.S.A. owners:
To program an entry gate, see the Owner's Manual.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all other devices, follow the same procedure as for garage door programming.
Inside rear view mirror type
Summary of Contents for HS 250h 2010
Page 1: ......
Page 2: ......
Page 53: ...52 Calling by speed dial Press Select Speed Dials Select the desired number to call...
Page 87: ......
