Lexus GS430 User Manual Download Page 79

Page: 79 / 632

SWITCHES

NOTICE

Do not operate the wipers if the windshield is dry. It may
scratch the glass.

Shifting the windshield wiper position

G12020

1 Rest position 2 Retracted position

The wiper blades retract under the hood when the wipers are
turned off.

In the following cases, the wipers should be shifted from the
retracted position to the rest position above the hood level.

When cleaning the windshield

When inspecting or replacing the wipers

When the retraction may be obstructed by snow, etc., at the
bottom of the windshield

Other than the above cases, keep the wipers in the retracted
position.

Summary of Contents for GS430

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands

Lexus GS430, User Manual

Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands