manualshive.com logo in svg

Lexus GS300 1998, Owner'S Manual

The Lexus GS300 1998 Owner's Manual is an essential resource for every owner, providing comprehensive guidance on operating and maintaining this iconic luxury sedan. Download this manual for free from manualshive.com and unlock a wealth of information to enhance your driving experience and ensure optimal performance of your vehicle.

Share
Download
background image

DRIVING TIPS

302

Use a washer fluid containing an antifreeze solution.

This product is available at your Lexus dealer and most auto
parts stores.  Follow the manufacturer’s directions for how
much to mix with water.

NOTICE

Do not use engine antifreeze or any other substitute
because it may damage your vehicle’s paint.

Do not use your parking brake when there is a possibility
it could freeze.

When parking, put the transmission into ”P” and block the
front wheels.  Do not use the parking brake, or snow or water
accumulated in and around the parking brake mechanism
may freeze the parking brake, making it hard to release.

Keep ice and snow from accumulating under the fenders.

Ice and snow built up under your fenders can make steering
difficult.  During bad winter driving, stop and check under the
fenders occasionally.

Depending on where you are driving, we recommend you
carry some emergency equipment.

Some of the things you might put in the vehicle are tire chains,
window scraper, bag of sand or salt, flares, small shovel,
jumper cables, etc.

Summary of Contents for GS300 1998













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GS300 1998

Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172

Brands by name

Popular brands

Load more brands