manualshive.com logo in svg

Lexus GS300 1998, Owner'S Manual

The Lexus GS300 1998 Owner's Manual is an essential resource for every owner, providing comprehensive guidance on operating and maintaining this iconic luxury sedan. Download this manual for free from manualshive.com and unlock a wealth of information to enhance your driving experience and ensure optimal performance of your vehicle.

Share
Download
background image

STARTING AND DRIVING

290

BRAKE SYSTEM

This brake system has 2 independent hydraulic circuits.  If
either circuit should fail, the other will still work.  However,
the pedal will be harder to press, and your stopping distance
will be longer.  Also, the brake system warning light may
come on.

CAUTION

Do not drive your vehicle with only a single brake system.
Have your brakes fixed immediately.

Brake booster

The brake booster uses brake fluid pressurized by the pump
to power–assist the brakes.  If the brake booster fails during
driving, the brake system warning light comes on and buzzer
sounds continuously.  In this case, the brakes may not work
properly.  If they do not work well, depress the brake pedal
firmly.  If the brake system warning light comes on,
immediately stop your vehicle and contact your Lexus dealer.

The brake system warning light may come on for about 60
seconds after the engine is started.  It is normal if the light goes
out after a while.

Depressing the brake pedal repeatedly may turn on the brake
system warning light and buzzer.  It is normal if the light goes
out and the buzzer stops sounding after a few seconds.

You may hear a small sound in the engine compartment after
the engine is started or the brake pedal is depressed
repeatedly.  This is a pump pulsating sound of the brake
system, and it is not a malfunction.

Summary of Contents for GS300 1998













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GS300 1998

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Saab 32 025 888 Installation Instructions preview
32 025 888
Brand: Saab Pages: 3
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Opel 2013 Corsa Brochure & Specs preview
2013 Corsa
Brand: Opel Pages: 32
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
RAM Ram 3500 2012 Specifications preview
Ram 3500 2012
Brand: RAM Pages: 13
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728

Brands by name

Popular brands

Load more brands