Lexus 2013 IS 350, Owner'S Manual

Page: 443 / 660

443
6-5. Using the other interior features
6
Inte
rior fe
ature
s
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Programming HomeLink
®
Steps through must be performed within 60 seconds, otherwise the
indicator light will stop flashing and programming will not be able to be com-
pleted.
Press and release the HomeLink
®
button you want to program and check
that the HomeLink
®
indicator light flashes (orange).
Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light
in view while programming.
Program a device.

Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the handheld transmitter button until the HomeLink
®
indi-
cator light changes from slowly flashing orange to rapidly flashing green
(rolling code) or continuously lit green (fixed code), then release the but-
ton.

Programming an entry gate (for U.S.A. owners)/Programming a device
in the Canadian market
Press and release the remote control transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
®
indicator light changes from slowly
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
®
operation by pressing the newly programmed button
and observing the indicator light:
●
Indicator light illuminates: Programming of a fixed code device has com-
pleted. The garage door or other device should operate when a Home-
Link
®
button is pressed and released.
1 3
1
2
3
4