F01322
Marks
-
INTRODUCTION
FOR ALL OF VEHICLES
IN-1 1
11
Author:
Date:
2005 LEXUS IS300 (RM1140U)
(3)
Even in cases of a minor collision where the SRS
does not deploy, the steering wheel pad (see page
), front passenger airbag assembly (see
page
), side airbag assembly (see page
), curtain shield airbag assembly (see page
), front airbag sensor (see page
side and curtain shield airbag sensor assembly (see
page
) and seat belt pretensioner (see page
) should be inspected.
(4)
Never use SRS parts from another vehicle. When
replacing parts, replace them with new parts.
(5)
Before repairs, remove the airbag sensor if shocks
are likely to be applied to the sensor during repairs.
(6)
Never disassemble and repair the steering wheel
pad, front passenger airbag assembly, side airbag
assembly, curtain shield airbag assembly, front air-
bag sensor, side and curtain shied airbag sensor
assembly or seat belt pretensioner.
(7)
Replace if the airbag sensor, steering wheel pad,
front passenger airbag assembly, side airbag as-
sembly, curtain shield airbag assembly, front airbag
sensor assembly or seat belt pretensioner if it has
been dropped, or if there are cracks, dents or other
defects in its case, bracket or connector.
(8)
Do not directly expose the steering wheel pad, front
passenger airbag assembly, side airbag assembly,
curtain shield airbag assembly, front airbag sensor,
side and curtain shied airbag sensor assembly or
seat belt pretensioner to hot air or flames.
(9)
Use a voltmeter/ohmmeter with high impedance (10
k
Ω
/V minimum) for troubleshooting of the electrical
circuit.
(10) Information labels are attached to the periphery of
the SRS components. Follow the instructions on the
labels.
(11) After work on the SRS is completed, check the SRS
warning light (see page
(c)
SPIRAL CABLE (in Combination Switch)
The steering wheel must be fitted correctly to the steering
column with the spiral cable at the neutral position, other-
wise cable disconnection and other troubles may result.
Refer to
of this manual concerning correct steer-
ing wheel installation.