Repair Information
4-3
4099
Access Cover Removal
1. Open the access cover.
2. Push the mounting tabs and remove the access cover.
Front Cover Removal
1. Remove the two cover mounting screws from the upper rear
corners of the rear cover.
Warning: When reassembling, do not overtighten these screws
as they will damage the plastic threads.
2. Place the printer on its back. Lift up on the two cover latches
located on each side of the base cover.
3. Place the printer on its base. Pull the cover forward and remove.
Base Cover Assembly Removal
1. Remove the front cover.
2. Remove the four screws holding the carrier frame assembly to
the rear of the base cover.
3. Remove the two screws holding the front of the carrier frame
assembly to the base cover.
4. Lift the carrier frame assembly out of the base cover assembly.
Ink Pad Removal
1. Remove the front cover.
2. Remove the base cover assembly.
3. Pry the ink pad off the base cover.
Buttons and Lenses Removal
1. Remove the front cover.
2. Pull up the button latches and slide the buttons off the front
cover.
3. Lift and remove the lenses.
Summary of Contents for Z31 Color Jetprinter
