Lexmark XC4100 Series User Manual Download

Page: 121 / 158

Vertical dark lines or streaks

ABCDE
ABCDE
ABCDE

Leading edge

Trailing edge

Action

Yes

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light can cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Do vertical dark lines or streaks still appear on prints?

Contact

customer

support

The problem is
solved.

Vertical white lines

Leading edge

Trailing edge

Action

Yes

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Do vertical white lines still appear on prints?

Contact

customer

support

The problem is
solved.

Troubleshooting

121

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands