Lexmark X7500, Setup Manual

Page: 13 / 251

5
Set up the scanner stand
Assembling the stand ling the stand
1
Slide the left and right legs onto
the extensions on the base. Make
sure the screw holes are facing in.
Secure the legs to the base each
with two medium screws.
2
Attach the base supports:
a
Use two medium screws each
to attach the supports to the
legs.
b
Use three medium screws
each to attach the supports to
the base.
3
Attach the beam to the legs with
six medium screws.
4
Attach the shelf to the legs with
four short screws.
5
Attach the shelf support to the
shelf with three short screws.
Note:
Save the four remaining medium
screws for later use.
Shelf support
Shelf
Beam
Base
Base
support
3 short
4 short
6 medium
4 medium
10 medium
Right and
left legs
Short Medium Long