Lexmark WinWriter 100, Service Manual

Page: 19 / 77

4076-0WJ
Diagnostic Information
8
Service Checks
Envelope Feed Service Check
First Print Line Service Check
FRU OR PROCEDURE ACTION
1 Envelope Loading Be sure the envelope guides have
been turned to the envelope load
positions
Be sure the envelope guides are
against the envelopes
Go to and perform the “Paper Feed
Service Check” on page 10 .
FRU OR PROCEDURE ACTION
1 End-of-Forms Flag Check the flag for binds or damage.
2 End-of-Forms Sensor Check the sensor for dirt.
3 System Board If the paper does not stop at the first
writing line, replace the system board.
4 Feed Arm Assembly Check all parts of the feed arm
assembly for binds, wear, or damage.
5 Operator Panel Go to the “Operator Panel Service
Check” on page 10 .