17
Set up the printer and print media handling options
b
Rotate the protector overlay
until the latch on the top snaps
into the groove as shown.
6
If you are not installing any print
media handling options, attach the
wire bail:
a
Remove the printer top cover
and slide the plastic bracket
onto the static brush holder.
Adjust the bracket so it is
centered over the area where
print media exits.
b
Place the tips of the wire bail
into the ends of the plastic
bracket so that the bail curves
downward.
c
Replace the top cover.
Installing an envelope feeder
The envelope feeder attaches to the front
of your printer behind the lower front
door. It can be removed when you are not
using it, making the printer more
compact.
Refer to the Publications CD for details
about using the envelope feeder.
Plastic bracket
Static brush
holder
