Lexmark T 430, Setup Manual

Page: 19 / 58

9
Set up the printer and options
Step 4: Set up the printer and
options
Positioning the optional drawer
CAUTION:
If you are adding an optional drawer
sometime after setting up the printer, be sure to turn the
printer off, unplug the power cord, and disconnect all
cables from the back of the printer before completing
these tasks.
The printer supports up to two additional
drawers. There is an optional 250-sheet
drawer and an optional 500-sheet
drawer. Each optional drawer consists of
a support unit and a tray.
The printer can be set up in the following
configurations:
(1) Base printer
(2) One 250-sheet drawer
(3) One 500-sheet drawer
(4) Two 250-sheet drawers
(5) One 250-sheet drawer and one
500-sheet drawer; the 500-sheet
drawer must be on the bottom of
the stack
Note:
The printer does not support the addition of two
500-sheet drawers.
Note:
The base printer’s 250-sheet tray is not
interchangable with the 250-sheet tray that comes with
the optional drawer.
1
2
3 4 5