Lexmark MB2236 User Manual Download

Page: 140 / 166

Poor fax print quality

Action

Yes

Step 1

Make sure that there are no print quality defects.

From the control panel, navigate to:

Settings

Troubleshooting

Print Quality Test Pages

For non-touch-screen printer models, press

to navigate

through the settings.

Correct any print quality defects. For more information, see

“Print quality is poor” on page 115

Is the fax print quality satisfactory?

The problem is
solved.

Go to step 2.

Step 2

Decrease the incoming fax transmission speed.

From the control panel, navigate to:

Settings

Fax

Fax Defaults

Analog Fax Setup > Fax

Receive Settings

Admin Controls

For non-touch-screen printer models, press

to navigate

through the settings.

From the Max Speed menu, select a lower transmission speed.

Is the fax print quality satisfactory?

The problem is
solved.

Contact

customer

support

Scanning problems

Cannot scan from a computer

Action

Yes

Step 1

Turn off the printer, wait for about 10 seconds, and then turn it
back on.

Resend the scan job.

Can you send the scan job?

The problem is
solved.

Go to step 2.

Step 2

Make sure that the cables between the printer and the print
server are secure.

For more information, see the setup documentation that came
with the printer.

Resend the scan job.

Can you send the scan job?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

140

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands