Lexmark M3150 Service Manual Download Page 23

Page: 23 / 400

•

Maintenance kit, 100 V (40X8440)

•

Maintenance kit, 110 V (40X8433)

•

Maintenance kit, 220 V (40X8435)

•

Forms and Barcode Card (41X0855)

•

Forms and B Simpliﬁed Chinese Font (41X0857)

•

Forms and B Japanese Font (41X0859)

•

Prescribe Card (41X0840)

•

IPDS card (41X0838)

•

Relocation kit (40X8696)

April 5, 2019

•

MarkNet Wireless Print Server FRU PN was changed from 40X8330 to 40X9939.

•

Critical information for controller board or control panel replacement was added.

–

Controller board removal was updated.

–

Control panel assembly removal was updated.

–

UICC removal was updated.

July 12, 2018

•

For Performing the initial troubleshooting check, relative humidity values were updated (now 8 to 80%).

•

A note for ambient temperature and relative humidity information was added to the Fuser service check.

April 27, 2018

•

Updated the 24x error code tables in the Diagnostics and troubleshooting chapter.

•

Updated the 24x.06 service check topic in the Diagnostics and troubleshooting chapter.

March 9, 2018

•

Updated the Main drive gearbox service check under the Diagnostics and troubleshooting chapter.

December 19, 2017

•

Updated the graphic for PN 40X9131 to include the MPF links in the assembly.

•

Added PN 41X2300 for the access cover link under the Covers assembly in the Parts Catalog chapter.

•

Added PN 40X9939 under Miscellaneous in the Parts Catalog chapter.

August 23, 2017

•

Updated

“Blank pages check” on page 43

•

Updated

“Solid black pages check” on page 49

May 31, 2017

•

Updated 40X4827 to 40X9652 in the topic “Miscellaneous” in the “Parts catalog” chapter.

May 24, 2017

•

Updated the "912 error messages" topic of the "912 errors" subgroup of the "Printer hardware errors" group
of the "Diagnostics and troubleshooting" chapter.

4514-6xx

Service conventions and change history

Summary of Contents for M3150

















































































































































































































































































































































































































Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands

Lexmark M3150, Service Manual

Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands