S
ET
THE
PRINTER
TO
SCAN
THE
ORIGINAL
DOCUMENT
BEFORE
DIALING
THE
NUMBER
The printer does not automatically redial if you set it to scan the original document after dialing the number.
Set the printer to scan before dialing so that you do not have to scan the document again if the fax fails. The scanned
document is saved in the printer memory. The printer can then retrieve it and automatically redial the number.
1
From the home screen, navigate to:
>
Fax Setup
>
Dialing and Sending
>
Scan
2
Touch
Before Dial
, and then touch
Accept
.
E
NABLE
ERROR
CORRECTION
Errors and blurs may appear in the faxed document if there is too much noise on the line. This feature enables the
printer to transmit the bad blocks of data again and correct the errors. When a fax has too many errors, the fax may
be rejected by the receiving fax machine.
1
From the home screen, navigate to:
>
Fax Setup
>
Dialing and Sending
>
Error Correction
2
Touch
On
, and then touch
Accept
.
E
NABLE
AUTOMATIC
FAX
CONVERSION
If the receiving fax machine does not support color fax, then this option automatically converts the outgoing color
fax to black and white. It also automatically reduces the resolution of the fax to a resolution that the receiving
machine can support.
1
From the home screen, navigate to:
>
Fax Setup
>
Dialing and Sending
>
Auto Fax Convert
2
Check to see if automatic fax conversion is set to On.
If it is not set to On, touch
On
, and then touch
Accept
.
M
AKE
SURE
THAT
THE
D
IAL
P
REFIX
SETTING
IS
CORRECT
The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or
telephone number. If the printer is in an office setting or in a private branch exchange, this can be a specific number
that you need to press so you can make a call outside the office.
Make sure that the dial prefix entered in the printer is correct for your network.
1
From the home screen, navigate to:
>
Fax Setup
>
Dialing and Sending
>
Dial Prefix
2
Check the prefix.
If the prefix is not correct, enter the correct prefix, and then touch
Accept
.
Troubleshooting
147
