Lexmark 250d - E B/W Laser Printer User Manual Download Page 35

Page: 35 / 101

Understanding the control panel lights

Change toner cartridge/invalid refill

Missing / Defective toner cartridge

Light sequence:

•

Toner Low/Replace PC Kit—On

•

Paper Jam—Blinking

•

Error—On

What this light sequence means:

The toner in the toner cartridge is getting low, or an invalid refill
toner has been installed.

What you can do:

•

Press and release Continue

to clear the light

sequence and continue processing the print job.

•

Turn the printer off.

•

Remove the toner cartridge, and shake it to extend the
life, or replace the toner cartridge with a valid toner
cartridge.

•

Replace the toner cartridge. (See Changing the toner
cartridge on page 80 for help.

•

Turn the printer back on.

Light sequence:

•

Toner Low/Replace PC Kit—On

•

Paper Jam—On

•

Error—On

What this light sequence means:

The toner in the toner cartridge is getting low, or a defective toner
cartridge has been detected.

What you can do:

•

Press and release Continue

to clear the light

sequence.

•

Turn the printer off.

•

Remove the toner cartridge, and shake it to extend the
life, or replace the toner cartridge if it is defective.

•

Replace the toner cartridge. (See Changing the toner
cartridge on page 80 for help.)

•

Turn the printer back on.

Summary of Contents for 250d - E B/W Laser Printer






































































































Search results

Summary of Contents for 250d - E B/W Laser Printer

Reviews:

Related manuals for 250d - E B/W Laser Printer

Brands by name

Popular brands

Lexmark 250d - E B/W Laser Printer, User Manual

Search results

Summary of Contents for 250d - E B/W Laser Printer

Reviews:

Related manuals for 250d - E B/W Laser Printer

Brands by name

Popular brands