Lexmark 250d - E B/W Laser Printer User Manual Download Page 20

Page: 20 / 101

Understanding the control panel lights

Printer error

Paper jam printer error

Light sequence:

•

Continue—On

•

Error—On

What this light sequence means:

The printer has one of the following errors:

•

Memory is full, insufficient to save what is in the buffer.

•

A page is too complex to print or is shorter than the set
page margins.

•

Resolution of a formatted page is reduced to 300 dpi.

•

A font error occurred.

•

Communication with the host computer is lost.

•

Short paper.

What you can do:

•

Press Continue

twice quickly to see the secondary

error code. See Secondary error codes on page 25 for
more information.

•

Press Continue

to clear the secondary message.

Light sequence:

•

Continue—On

•

Paper Jam—On

What this light sequence means:

The printer has a paper jam.

What you can do:

•

Press Continue

twice quickly to see the secondary

error code. See Secondary error codes on page 25 for
more information.

•

Press Continue

to resume printing once all the

jammed pages are cleared from the paper path.

Summary of Contents for 250d - E B/W Laser Printer






































































































Search results

Summary of Contents for 250d - E B/W Laser Printer

Reviews:

Related manuals for 250d - E B/W Laser Printer

Brands by name

Popular brands

Lexmark 250d - E B/W Laser Printer, User Manual

Search results

Summary of Contents for 250d - E B/W Laser Printer

Reviews:

Related manuals for 250d - E B/W Laser Printer

Brands by name

Popular brands