Selecting and locking a pitch
The printer data stream may contain control codes which select a particular pitch. To override the codes, you can
select and lock a particular pitch of your choice.
1
To select a pitch, open the control panel to layer 2.
2
Press
Pitch
repeatedly until the pitch light comes on next to the pitch you want.
3
Continue pressing
Pitch
until the Pitch Lock light comes on and the pitch you want is selected.
The pitch is locked until the printer is turned off.
Disabling Pitch Lock
1
To disable Pitch Lock, press
Pitch
repeatedly until the Pitch Lock light turns off and the pitch you want is selected.
2
Close the control panel.
3
If the printer is offline, press
Start/Stop
.
When the Ready light comes on, the printer is ready to print.
Using the control panel
22
