Troubleshooting
14
4
Troubleshooting
Use this section to solve problems you may have while setting up the internal wireless print server.
The MarkNet N8050 Utilities CD does not launch automatically
1
Close all open software programs.
2
Reinsert the
MarkNet N8050 Utilities
CD. If the setup utility screen appears, continue your
setup instructions.
If the setup utility screen does not appear, do the following:
a
From your desktop, double-click
My Computer
.
b
Double-click the CD-ROM drive icon.
c
If necessary, double-click
setup.exe
.
The Wireless Setup Utility was not able to communicate with the
printer
•
Verify that the printer has power.
•
Verify that the USB cable is properly connected to both the computer and the printer.
•
Connect the printer to a different USB port on your computer.
•
If repeated attempts to connect the printer to the computer using a USB cable fail, preventing
you from using the Wireless Setup Utility, you can use the
Manual configuration
method to
configure the print server for use on the network.
The network key was invalid
A network key is like a password and should follow this criteria:
•
WEP key
—
Exactly 5 or 13 ASCII characters
Or
—
Exactly 10 or 26 Hexadecimal characters (using A—F and 0—9 only)
Summary of Contents for 14S0165 - MarkNet N8050 Print Server
Page 4: ...Contents iv Glossary 21 ...
