Safety information
2
•
The printer is powered off.
Note:
The process used for installing the internal wireless print server in your printer may
vary between different printers. See the “Installing Options” section of the printer
documentation for information on installing wireless print server option cards.
Attaching the wireless print server antenna
Once the print server is installed, attach the antenna to the option card. Make sure to tighten the
connector until the antenna is attached securely, as a loose connection can result in a poor wireless
signal. Then, bend the joint until the antenna is pointing up.
Note:
Some printer configurations create space restrictions that may require the antenna
be attached before installing the option card.
Safety information
•
Make sure that the printer is powered off before attempting an installation of the wireless print
server option card in the printer.
•
Refer service or repairs, other than those described in the user documentation, to a
professional service person.
CAUTION:
Do not set up this product or make any electrical or cabling connections during a
lightning storm.
Summary of Contents for 14S0165 - MarkNet N8050 Print Server
Page 4: ...Contents iv Glossary 21 ...
