Lexmark 13R0243 X4875 2.0/PictBridge/ Page 12 Network Manual Download

Page: 12 / 76

Disconnect and reconnect the power cord

Disconnect the power cord from the wall outlet, and then from the printer.

Plug the cord all the way into the power supply on the printer.

Plug the cord into an electrical outlet that other electrical devices have been using.

If the

light is not on, press

Software does not install

These are possible solutions. Try one or more of the following:

Check your operating system

The following operating systems are supported: Windows Vista, Windows XP, Windows 2000, and Mac OS X
versions 10.34 and 10.4 (not versions 10.0, 10.1, or 10.2).

Note:

Windows 2000 users should use Service Pack 3 or later.

Check your system requirements

Check that your computer meets the minimum system requirements listed on the printer box.

Check USB connection

Check the USB cable for any obvious damage.

Firmly plug the square end of the USB cable into the back of the printer.

Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the

USB symbol.

Check wireless connection

Check that the Wi-Fi indicator light is on. For more information, see “Understanding the parts of the printer” on
page 16.

Reinstall the software

Turn off and then restart your computer.

Click

Cancel

on all New Hardware Found screens.

Insert the CD, and then follow the instructions on the computer screen to reinstall the software.

102

Summary of Contents for 13R0243 X4875 2.0/PictBridge/













































































Search results

Summary of Contents for 13R0243 X4875 2.0/PictBridge/

Reviews:

Related manuals for 13R0243 X4875 2.0/PictBridge/

Brands by name

Popular brands

Lexmark 13R0243 X4875 2.0/PictBridge/, Network Manual

Search results

Summary of Contents for 13R0243 X4875 2.0/PictBridge/

Reviews:

Related manuals for 13R0243 X4875 2.0/PictBridge/

Brands by name

Popular brands