Lexmark 13R0243 X4875 2.0/PictBridge/ Page 41 Network Manual Download

Page: 41 / 76

Duplex unit does not operate correctly

These are possible solutions. Try one or more of the following:

Check paper size and type

Check the paper size and type to make sure the paper is supported by the printer. If you are using automatic
duplexing, use only letter- or A4-size plain paper.

Check for paper jams

Check for and clear any paper jams. For more information, see “Paper jam in the duplex unit” on page 139.

Make sure the duplex unit is properly installed

Remove the duplex unit and reinstall it. For more information, see “Paper jam in the duplex unit” on page 139.

Removing an external print server

Press

to turn the printer off.

Make sure the power to the print server is off.

Remove the USB cable from the external print server.

Disconnect the external print server from the computer.

Connect the printer USB cable to the printer.

Press

to turn the printer back on.

Cable is not connected, is loose, or is damaged

The printer cable must be fully connected and undamaged for proper communication.

Make sure the USB cable is connected to the USB port on the back of the computer

The USB port on the back of the computer is marked by

. Plug the long, flat end of the USB cable into this

port.

Make sure the other end of the USB cable is connected to the back of the printer

Plug the smaller, more square end of the USB cable into the back of the printer.

Make sure the cable is not damaged or loose

Make sure:

•

The USB cable is not damaged.

•

The

light is on.

For more information, see the related topic below.

Printer is plugged in but does not print

These are possible solutions. Try one or more of the following:

Make sure the printer is set as the default printer

Try printing a test page.

131

Summary of Contents for 13R0243 X4875 2.0/PictBridge/













































































Search results

Summary of Contents for 13R0243 X4875 2.0/PictBridge/

Reviews:

Related manuals for 13R0243 X4875 2.0/PictBridge/

Brands by name

Popular brands

Lexmark 13R0243 X4875 2.0/PictBridge/, Network Manual

Search results

Summary of Contents for 13R0243 X4875 2.0/PictBridge/

Reviews:

Related manuals for 13R0243 X4875 2.0/PictBridge/

Brands by name

Popular brands