Poor scanned image quality
These are possible solutions. Try one or more of the following:
Check messages
If an error message is displayed, see “Error messages on the printer display” on page 147.
Clean the scanner glass
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
Adjust the quality of the scan
1
Load an original document facedown on the scanner glass.
2
From the desktop, double-click the
Productivity Studio
icon.
3
From the Welcome screen, click
Scan
.
4
Click
Custom Settings
.
5
Select a higher scan resolution.
6
Click
Start
.
Review steps to improve print quality
See “Improving print quality” on page 118.
Are you scanning from photo or glossy paper, a magazine, or a newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper, see “Removing wavy
patterns from scanned photos, magazines, or newspapers” on page 70.
Check quality of original document
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
Partial document or photo scans
These are possible solutions. Try one or more of the following:
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
Check paper size
Make sure the paper size being used matches the size you selected.
Check Original Size setting
Make sure the Original Size setting is
Auto Detect
or the size of the original document you are scanning.
Cannot scan to a computer over a network
See “Scanning to a computer over a network using the control panel” on page 89.
146
