Lexmark 037 User Manual Download Page 249

Page: 249 / 360

Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the
side rails inside the printer.

Close the multipurpose feeder door and the front cover.

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Maintaining the printer

249

Summary of Contents for 037









































































































































































































































































































































































Search results

Summary of Contents for 037

Reviews:

Related manuals for 037

Brands by name

Popular brands

Lexmark 037, User Manual

Search results

Summary of Contents for 037

Reviews:

Related manuals for 037

Brands by name

Popular brands