32
51D0528
LOG PLACEMENT
INSTALLING LOGS AND ROCK WOOL (EMBER MATERIAL) IN FIREBOX
1. Carefully remove logs from wrapping.
2. Remove glass frame.
See Glass Frame Removal, page 30.
3. Place bottom right log (#3) on two pins against right side of firebox.
See Figure 42.
4. Place rear log (#1) on two pins against back side of firebox.
See Figure 43.
Figure 42 - Installing Bottom Right Log (#3)
Before you begin
— This unit is supplied with eight ceramic fiber logs. Do not handle these logs with your bare hands.
Always wear gloves to prevent skin irritation from ceramic fibers.
After handling the logs, wash your hands gently with
soap and water to remove any traces of fibers.
The positioning of the logs is critical to the safe and clean operation of this heater.
Excessive sooting and other problems may result if the logs are not properly and firmly
positioned in the appliance. Never add additional logs or embellishments such as pine
cones or vermiculite to the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only
parts specifically approved for this heater may result in property damage or
personal injury.
W
ARNING
Figure 43 - Installing Rear Log (#1)
Bottom Right
Log (#3)
Rear Log
(#1)
Pins
Pins
