3
3. Installation Instructions
3.1 If using the spring clip, attach the clip to the bracket by inserting the ends of the
clips into the holes in the cradle.
Once the clip is securely attached to the bracket, slide the clip between the outer shell
and EPS padding of the helmet along the left side where desired.
If using the adhesive tape, remove the backing from one side of the adhesive, and
apply the tape to the back of the bracket. Thoroughly clean and dry the area of the
helmet where you plan to affix the bracket, peel off the backing on the adhesive, and
press the bracket firmly to the helmet in the position desired.
Clip Bracket
3.2 Locate an area in the nose section just to the left of center to mount the
microphone. If you are installing into an open face helmet, please adjust the direction
of the microphone so that the triangular mark on the microphone is pointing towards
your mouth.
Summary of Contents for LX-B2
Page 1: ......
Page 12: ...WWW LEXINMOTORCYCLE COM tech lexinmotorcycle com 1 800 380 8248 ...
Page 13: ......