LEXIN LX-B2, User Manual

Page: 7 / 13

5
4. General Operation Instructions
4A. Powering On/Off and Charging
• Powering On
Press & hold the Function Intercom button for about 3 seconds to power on.
The blue LED turns on and will blink. The unit will announce power on, and the
battery level.
• Powering Off
Press and hold the Function Intercom button for about 2 seconds to power
off. The blue LED will turn solid, then release the button. The unit will announce
powering off.
• Charging
Plug the supplied micro USB cable into the port at the rear of the main unit, and the
USB-A plug into any 1 or 2 amp USB port. The LED turns on red while charging, and
turns off when the headset is fully charged. It takes about 2.5 hours to be completely
charged.
4B. Pairing the LX-B2 with a Bluetooth Device
Before using the LX-B2 Bluetooth headset with any Bluetooth devices for the first
time, the pairing process must be performed. The LX-B2 can be paired with Bluetooth
mobile phones, Bluetooth audio devices such as GPS, and with other LX-B2
Bluetooth headsets. It may also be paired with other headsets that support a
“Universal Pairing” mode. This pairing operation is only required once for each
Bluetooth device, and the headset will remain paired with the devices, automatically
connecting to the paired devices again when they are within range.
• Entering Pairing Mode
1. Press & hold the Function Button for about 5 seconds until the LED flashes red and
blue alternately. The LX-B2 can now be paired to another Bluetooth device.
• Pairing a Mobile Phone
1. Enter Pairing Mode as described above.
2. Search for Bluetooth devices on your mobile phone. The headset will be listed on
your mobile phone as LX-B2.
3. If requested, enter 0000 for the PIN
4. Your mobile phone will confirm that pairing is complete. Then only the blue LED
blinks every 5 seconds
• Pairing a Stereo Bluetooth Adaptor
1. Turn on audio source and prepare the Stereo Bluetooth Adaptor for pairing
2. Put the LX-B2 main unit in Bluetooth pairing mode (see above)
3. Turn on or plug in Stereo Bluetooth Adaptor
4. Audio source will automatically start playing though LX-B2 main unit when
pairing is complete